Transcend-information T.sonic 610 User Manual download pdf (Page 36)

Troubleshooting

If an error occurs, first check the information listed below before taking your T.sonic for repair. If

you are unable to remedy a problem from the following hints, please consult your dealer, service

center, or local Transcend branch office.

Driver CD cannot auto-run in Windows

Enter Device Manager in the Control Panel and enable the Auto-Insert function of the CD-ROM

drive. Alternatively, you can manually execute the T.sonic.EXE from the driver CD.

Operating system cannot detect the T.sonic

Check the followings:

1. Is your T.sonic properly connected to the USB port? If not, unplug it and plug it in again.

2. Is your T.sonic connected to the Mac keyboard? If yes, unplug it and plug it into an available

USB port on your Mac Desktop instead.

3. Is the USB port enabled? If not, refer to the user’s manual of your computer (or motherboard)

to enable it.

4. Is the necessary driver installed? If your computer is equipped with Windows 98SE, you must

insert the Driver CD into the CD-ROM and refer to the “Driver Installation for Windows

98SE” section to complete the driver installation before using your T.sonic. A driver is not

required for Win ME/2000/XP, Mac OS 9.0 or later, or Linux kernel 2.4 or later

Cannot power on

Check the following:

1. Is the T.sonic connected to your computer? If yes, unplug it.

2. Is the LOCK switch set to “HOLD”? If yes, set it to “OFF”.

Cannot download MP3 or WMA files to the T.sonic

As required, uninstall the driver and re-install it. If it doesn’t work, see Recover T.sonic to format

your T.sonic.

Buttons don’t work

Check to see if the LOCK switch is set to “HOLD ”. If yes, set it to “OFF”.

Cannot hear track playback

Check the following:

1 2 ... 31 32 33 34 35 36 37 38 39 40

No comments

Transcend-information T.sonic 610 User Manual Page 36